BULLET RESISTANT CONSTRUCTION: Booth construction to use materials rated for U.L. 752 levels 1, 2 and 3 (Specify threat level protection required).
CANOPY: Overhangs can range from None to 24″. Fascia can range from minimum required for devices, up to 12″.
CASHIER CONVENIENCES: Slide-up, side sliding full height, or energy saving style cashier windows. Transaction drawers, deal trays, intercoms and ticket windows.
CASH MANAGEMENT: Locking cash drawers and drop safes.
CLEARANCE ISSUES: Custom heights for low clearance applications
CLIMATE CONTROL: Through wall cool only or combination heat/cool type or roof mounted air conditioner units (painted galvanized expanded metal roof is used to hide the roof mounted air conditioner). Additional or higher watt output heaters. Package HVAC units. Some AR options may not be available due to energy code.
CORROSION BARRIERS: Stainless steel base/base trim.
CUSTOM EXTERIORS: Two-color paint, Factory applied cast stone, stone aggregate panels, face brick, EIFS (Exterior insulation and finish system), ready-to-brick at site treatments and logos & vinyl signage.
DOORS: Steel hinged door, with three ball bearing full mortise hinges with non-removable pins. Hinged door(s) shall include appropriately sized hydraulic closer (unless owner or code circumstances over-rule). Cylindrical type entrance lockset is standard.
ELECTRICAL: Load centers with higher amperage main disconnects and additional circuit breaker spaces. 3-Phase load centers, mini power-zones or transformers. Factory installed junction boxes and raceways for future field installed fire, security or communications equipment.
FLOORING: Vinyl composite floor tile, sheet vinyl or carpet mounted on ¾” wood sub floor; lay in anti-fatigue mat (for buildings 4’ or 5’ wide only).
GLAZING: Tinted or Low-e or reflective or insulated safety glass.
INSULATION: Additional insulation in ceiling, floors and walls for severe weather areas.
LIGHTING: LED lighting under canopy overhang, single or duplex lamp exterior floodlights or traffic signal lights.
NOISE MANAGEMENT: Acoustical tile ceiling, sound deadening walls, laminated glass.
RECEPTACLES: Additional electrical outlets, isolated ground, surge suppression and ground fault interrupt receptacles.
ROOF: Optional finial: Provide decorative 24″ aluminum rod with 4″ ball. Finial shall be threaded for simple installation after building has been delivered to job site. Ball painted to match roof. Threaded lifting ring(s) with captive nuts welded into the roof. Remove lifting rings after building offloaded at site and replace with either finial or plug nuts. Inner roof braced accordingly. Optional premium roof: At architect’s instructions, provide standard color Kynar® or equal pre-finished 24 gage minimum metal roofing, hip style of pitch specified. Metallic look finish, such as copper, is also available. Actual copper roofing also available (not patina).
VENTILATION: Exhaust fans (specify CFM) and louvers, operable windows. If operable windows are required, provide sliding windows as shown on drawings for ventilation and/or transaction purposes. For ventilation windows, include insect screens.
WORK COUNTER: Plastic laminate or stainless steel upgrade or additional work counter.
