CANOPY: Overhangs can range from None to 36″. Fascia can range from minimum required for devices, up to 25″. The 25″ fascia is a split fascia used to conceal view of optional roof mounted air conditioner.
CASHIER CONVENIENCES: Slide-up, side sliding full height, or energy saving style cashier windows. Transaction drawers, deal trays, intercoms and ticket windows.
CASH MANAGEMENT: Locking cash drawers and drop safes.
CLEARANCE ISSUES: Removable lifting rings and custom heights for low clearance applications
CLIMATE CONTROL: Through wall cool only or combination heat/cool type or roof mounted air conditioner units. Additional or higher watt output heaters. Package HVAC units. Some AR options may not be available due to energy code.
CORROSION BARRIERS: Stainless steel base.
CUSTOM EXTERIORS: Two-color paint, logos, vinyl signage.
DOORS: Steel hinged door, with three ball bearing full mortise hinges with non-removable pins. Hinged door(s) shall include appropriately sized hydraulic closer (unless owner or code circumstances over-rule). Cylindrical type entrance lockset is standard.
ELECTRICAL: Load centers with higher amperage main disconnects and additional circuit breaker spaces. 3-Phase load centers, mini power-zones or transformers. Factory installed junction boxes and raceways for future field installed fire, security or communications equipment.
FLOORING: Vinyl composite floor tile, hammered rubber, sheet vinyl or carpet mounted on ¾” wood sub floor; Lay in anti-fatigue mat (for buildings 4’ or 5’ wide only).
GLAZING: Tinted polycarbonate/glazing.
INSULATION: Additional insulation in ceiling, floors and walls for severe weather areas.
LIGHTING: Recessed interior LED lights, LED lighting under canopy overhang, single or duplex lamp exterior floodlights and traffic signal lights.
NOISE MANAGEMENT: Acoustical tile ceiling and sound deadening walls.
RECEPTACLES: Additional electrical outlets, isolated ground, surge suppression and ground fault interrupt receptacles.
VENTILATION: Exhaust fans (specify CFM) and louvers, ventilation windows with insect screens located per drawing.
WINDOWS: Radius corner window openings.
WORK COUNTER: Plastic laminate or stainless steel upgrade or additional work counter.