BULLET RESISTANT CONSTRUCTION: Booth construction to use materials rated for U.L. 752 levels 1, 2 and 3 (Specify threat level protection required).
CANOPY: Overhangs can range from None to 36″. Fascia can range from minimum required for devices, up to 25″. The 25″ fascia is a split fascia used to conceal view of optional roof mounted air conditioner.
CASHIER CONVENIENCES: Slide-up, side sliding full height, or energy saving style cashier windows. Transaction drawers, deal trays, intercoms and ticket windows.
CASH MANAGEMENT: Locking cash drawers and drop safes.
CLEARANCE ISSUES: Removable lifting rings and custom heights for low clearance applications
CLIMATE CONTROL: Through wall cool only or combination heat/cool type or roof mounted air conditioner units. Additional or higher watt output heaters. Package HVAC units. Some AR options my not be available due to energy code.
CORROSION BARRIERS: Stainless steel base.
CUSTOM EXTERIORS: Two-color paint, Factory applied cast stone, stone aggregate panels, face brick, EIFS (Exterior insulation and finish system), ready-to-brick at site treatments and logos & vinyl signage.
DOORS: Steel hinged door, with three ball bearing full mortise hinges with non-removable pins. Hinged door(s) shall include appropriately sized hydraulic closer (unless owner or code circumstances over-rule). Cylindrical type entrance lockset is standard.
ELECTRICAL: Load centers with higher amperage main disconnects and additional circuit breaker spaces. 3-Phase load centers, mini power-zones or transformers. Factory installed junction boxes and raceways for future field installed fire, security or communications equipment.
FLOORING: Vinyl composite floor tile, sheet vinyl or carpet mounted on ¾” wood sub floor; lay in anti-fatigue mat (for buildings 4’ or 5’ wide only).
GLAZING: Tinted or Low-e or reflective or insulated safety glass. Insulated glazing has a decorative corner cover to conceal edge.
INSULATION: Additional insulation in ceiling, floors and walls for severe weather areas.
LIGHTING: LED lighting under canopy overhang, single or duplex lamp exterior floodlights or traffic signal lights.
NOISE MANAGEMENT: Acoustical tile ceiling, sound deadening walls, laminated glass.
RECEPTACLES: Additional electrical outlets, isolated ground, surge suppression and ground fault interrupt receptacles.
VENTILATION: Exhaust fans (specify CFM) and louvers, vent windows with insect screens to be located per drawing.
WORK COUNTER: Plastic laminate or stainless steel upgrade or additional work counter.
