SHLT - 012

Pay-On-Foot enclosures can be large or small. This particular unit was designed to protect the POF (pay-on-foot) machine and allow enough room for one patron to also be protected from the harsh elements while completing transactions. This 3-sided unit measures 4' deep x 4' wide. The overall height is 7' 6. Roof has an 18" fascia on all sides, offering plenty of room for graphics if desired. Coverage of the overhang is 6" on sides and back with a larger 12" overhang covering the front. Built-in rain gutter channels water to desired location. Clear anodized aluminum frame provides a nice clean look for years of service. Typically, the economical modular aluminum STS20 system has a 36" aluminum kick panel on the lower section of each wall. This model was modified to have full height ¼” clear Lexan panels.

The STS20 modular system can be designed as small as 2' x 2'  and as large as 8' x16' . Larger sizes can be achieved by combining smaller units. Send Par-Kut a sketch and we will develop a unit to fit your project.